No more GU IV genuine keyless entry. Installed a Dynamco Cyclops controller.

[robbo0001]

WHhy wouldnt it come with OEM remotes from new?
Is it "fitted for/ but not with" a wireless system?... or keyed central locking at least?
All research I did when trying to sort our car out....most people changed over to Aftermarket systems, because of the cost savings (compared to Mr Nissans extotionate pricing)

[davejones]

IT might be a little off the subject - I have a GU 2008 DX, which doesn't come with remotes from factory, but as I understand it I can just buy one, and program it in, is this correct?

I'd say you probably can't. Usually in the DX models there's just a switch in the drivers side door which activates the other doors actuators. So you need to add a kit with a controller, actuator for the drivers side door & remotes. There's a similar kit mentioned earlier in this thread.

Dave

[ShaunM]

Massive thanks to davejones! You took all the work out of this job. Just installed a Warlock alarm from JB Hifi in about 30mins and it's working great.

[davejones]

G'day Shaun

No problem!

Dave

[rodneyb81]

Hi Shaun when you installed the warlock kit was it a kg800 ?

I have tried wiring the unit up but does not appear to be activating the central locking what form did you wire for positive, negative or positive/negative. Thanks Rodney ImageUploadedByTapatalk1370262281.308761.jpgImageUploadedByTapatalk1370262303.806712.jpg

[ShaunM]

Hi Shaun when you installed the warlock kit was it a kg800 ?

I have tried wiring the unit up but does not appear to be activating the central locking what form did you wire for positive, negative or positive/negative. Thanks Rodney ImageUploadedByTapatalk1370262281.308761.jpgImageUploadedByTapatalk1370262303.806712.jpg

From memory I think it was the positive/negative trigger connected to pin 2 & 8 as shown in davejones' pic attached.
ImageUploadedByMotorculture1370334300.640019.jpg

[TSam]

Hi I am new to the forum and trying to install a keyless module to my 2004 Patrol. Besides the wires mention in the thread, there are 6 or 7 more wires. Does any one know what they are for?

[neilo99]

Hi DaveJones.
Would you know if it is possible to reset the receiver and remove any previously coded FOBs?
I am only able to get one FOB to operate at a time. There should be 4 memory slots for 4 keys but when I code a new one in, it deletes the previous one.

Cheers!

[davejones]

Hi DaveJones.
Would you know if it is possible to reset the receiver and remove any previously coded FOBs?
I am only able to get one FOB to operate at a time. There should be 4 memory slots for 4 keys but when I code a new one in, it deletes the previous one.

Cheers!

No idea sorry. Not sure I'd bother. The price of their remotes was why I went this way in the first place.

DJ