Replacing radiator hoses at the moment and after taking off the lower hose I see the water pump inlet looks like this.
IMG_20180213_192454.jpg
After cleaning it up a bit it looks like this.
Is this gone too far or could I use it again?
Replacing radiator hoses at the moment and after taking off the lower hose I see the water pump inlet looks like this.
IMG_20180213_192454.jpg
After cleaning it up a bit it looks like this.
Is this gone too far or could I use it again?
Last edited by Chubba; 13th February 2018 at 09:03 PM.
98' Ti, 4.5L, 2" lift, factory rear diff lock with front E-locker, 63% reduction gears
"GO YOU CROWS"
id give it a hit with some emery paper to flatten it out and give it a paint and good to go.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Chubba (14th February 2018)
Yeah hit with some emery if you want. I would just put it back on if it were me though. lol.
Chubba (17th February 2018)