My winch is two far back

[nowoolies]

It's too shiny ... Pml

luvly comment from a toorack tracktor owner haahhahahahahahahahahahaha ohh that hurts laughin that much

[nowoolies]

well come on, everyone else was doing it, i just couldn't resist hahahahahahaha

my turn will come lol

[katwoman]

luvly comment from a toorack tracktor owner haahhahahahahahahahahahaha ohh that hurts laughin that much

Hey, it rained all day today, and Katrol got her new boots wet. So there

[nowoolies]

Hey, it rained all day today, and Katrol got her new boots wet. So there

but not dirty hahahaha

[GUtsy ute]

That's how they all are Paul, the way I stopped mine rubbing on the bar was to space the fairlead out toward the front of the bar futher with longer bolts
and flat bar spacers.

[nowoolies]

That's how they all are Paul, the way I stopped mine rubbing on the bar was to space the fairlead out toward the front of the bar futher with longer bolts and flat bar spacers.

got the same winch on my other Nissan and the rollers are out in front of the bar work
the cable dont touch at all on the bar

[hekarewe]

there ya go
if you look closely you can see the scrape marks left by the cable and that was just starting to tension it up

that does not look like an ARB bar looks more like a TJM or something,,,,,, you wont be able to move the winch itself forward as in the photos it looks hard up agianst the inside of the bar already,,,,, how ever i did notice a fitting bolts to the fairlead ass (rollers) you may be able to put a spacer behind the fairlead ass and that way move it forward so that it clears the bar. just bear in mind the fairleads and the hook on the cable must not protrude further the bar work. hope this helps

[nowoolies]

that does not look like an ARB bar looks more like a TJM or something,,,,,, you wont be able to move the winch itself forward as in the photos it looks hard up agianst the inside of the bar already,,,,, how ever i did notice a fitting bolts to the fairlead ass (rollers) you may be able to put a spacer behind the fairlead ass and that way move it forward so that it clears the bar. just bear in mind the fairleads and the hook on the cable must not protrude further the bar work. hope this helps

thanks mate

[timbar]

got the same winch on my other Nissan and the rollers are out in front of the bar work
the cable dont touch at all on the bar

get the measureing stick out and find out where it is out and go from there Paul ?????????????????????????

[kingy]

I am very interested in the outcome as I have just got a warn xd9000 winch to install into my Nissan winch bar...