Wiring up is as per the instructions, is pretty straight forward.
Based on advice from redarc we used minimum 30amp wiring for the black and blue, and 20 amp for the brake input - which retrospectively was possible major overkill -- I think we ended up using mostly 6mm based on what we had available.
I installed the controller on the pop out panel above the mic - good position for viewing and also access for driver abs passenger if required.
The unit was installed under the steering wheel on the panel - the set of 4 screws on the right hand side. Other set of bolts is for my lock up torque converter.
Instructions from redarc say that it doesn't matter what orientation the unit is it, as long as it's secure and can't move.
If you got any other questions let me know
Sent from my iPhone using Tapatalk
Reply With Quote