Rosscos GQ Rejuvenation

[Plasnart]

One minor bugger but lucky i found it now,. Checked the new body lift blocks (1"), they're 50mm diameter which is smaller than the body mounts (80mm) so will have to get sum more bigger ones. . . Trying to get onto the supplier with no luck. They are black poly which i kinda like, if not might have to go ally which I'm sure should do the job too? ?

Sent from my GT-I9506 using Tapatalk

I'd be wary of galvanic corrosion with alloy blocks Rossco. No expert but I'd either go poly or only use the alloy with separators between the body/chassis and the block.

https://en.wikipedia.org/wiki/Galvan...alvanic_series