Rosscos GQ Rejuvenation

[Winnie]

Was actually reasonably productive in between playing with little wheels & seats. . .


Rear quarter chop done with blanking plates from racebred. Just needs a lick is bog & primer. Might get some seam sealer or similar for the inside join.



Sent from my GT-I9506 using Tapatalk

Must make it so much easier working on it as a shell. So jealous of what you are doing man, gonna be the best GQ getting around.

Sent from my SM-G935F using Tapatalk

[GQtdauto]

Tig or mig welded ? If I ever get around to making a rear bar I will do that chop as well .

[Rossco]

Used a mig. Not too bad does take a while tho grinding back then patching holes. . .

Yeah soooooo much easier just a shell it's awsome! ! Can just stand in the engine bay & swing around. 😅

Sent from my GT-I9506 using Tapatalk

[MB]

Must be that cheapo Argon shield Rossco :-)

[Rossco]

Must be that cheapo Argon shield Rossco :-)

Nah cheers a million ur a lifesaver. .
Nuthn wrong with the gas i reckon, more the operator . . .

Sent from my GT-I9506 using Tapatalk

[MB]

I always blame that gas mate, my welds would be perfect without it ;-)

[GQtdauto]

And I know better .

[mudski]

You need to make up one of those body stands where you can roll the entire body over and work on the underside, from the top. I bet you'd take a lot longer preping the body if you had one of those. You'd be looking at every square inch of the under side and looking at what you can do.

[Rossco]

I always blame that gas mate, my welds would be perfect without it ;-)

Actually forgot to to turn it on when i started - rookie mistake . . . Wondered why it was so rubbish. .

Yeah those spinny things for working on bodys would be cool. .
Need a big one for a GQ i reckon. .





Sent from my GT-I9506 using Tapatalk

[Rossco]

Me braces arrived today, look good ☺ . . .



Sent from my GT-I9506 using Tapatalk