Clunk's TD42

[threedogs]

@Clunk hope you're ok, give it a day or two before declaring an all clear.
Bummer about you're "Q" hopefully you'll have it up and running real soon.

[Clunk]

Sad to hear but hopefully all will be fixed. Something you don't need though I bet. Good luck with it mate.

yep you've go that right...... it'll get sorted one way or another, insurance will take care of it

[Clunk]

Shiny new grill, bonnet etc..... they've pulled the bar back in place as much as possible, so I dont have to scrabble to get a new one quickly
They didnt replace the bonnet protector though just cut down the sides and norrowed it..... might just take it off.



Even hoovered the inside of the car, which was nice seeing as I dont bother lol

[threedogs]

Yeah thats bar is very close to the light lens, be carefull the body doesnt break it
as its moves about.
But hey you have your baby back gotta be happy with that.
Get some mylar or similar and apply to the leading edge
of the bonnet to protect it those protector only gather leaves imo

[GQtdauto]

That's a very snug fit between bulbar and blinker , but ohhhhhh so shiny and new looking .

[Clunk]

Yeah thats bar is very close to the light lens, be carefull the body doesnt break it
as its moves about.
But hey you have your baby back gotta be happy with that.
Get some mylar or similar and apply to the leading edge
of the bonnet to protect it those protector only gather leaves imo

Never had any issues with leaves and stuff getting stuck.... that's as far as they were willing to pull the bullbar out in case they snapped anything. But its also the angle of the photo, there's more room than it looks. Gonna gove the insurers a call tomorrow and see if they can give me a list of what was repaired / replaced

[Clunk]

Oh and I'll probably take the old big nissan badge off the grill. Kind of looks out of place now

[taslucas]

Do a burnout

>>>tappin from tassie

[Clunk]

Do a burnout

>>>tappin from tassie

Probably burn the clutch out first

[threedogs]

Over all are you happy with the repair work they did.?
whats happening with the bullbar??