First post.
Anyone got pictures/ideas that they have run cables for cables up the barn doors preferably without drilling. Rear mounted 3/4 rack with a single rack for the front spottie. Didnt want to run the entire loom up the snorkle for the 3 at the back. Got a bit of an idea how I am gonna do it just seeing it there are better ideas than mine
Cheers
Did you have any luck with this ijjm87i ?
I was reading on a forum ,that you can buy a bolt with a hole in the center so you can run a wire through it .
It was holding the spare tyre on the right hand door ,but their light was mounted to the spare wheel carrier .
Hope that helps .
Craig
The bolt you mention would me a 10mm x 1.25 pitch eash enough to drill a holl down the middle.Originally Posted by FNqGu04
They drilled 3/16th hole under my rear wheel bracket and fitted a 1/8th rubber grommet.
Loving the hole in the bolt though.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
20131009_152115 (Small).jpg20131009_152110 (Small).jpg
I tried running a wire in through the rear door but found the
water would "wick" down the cable and into the cargo area
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
I know you said without drilling but this is what I did. Never had a problem with water getting in.
2007 GU ST-S 4.8 Patrol.
40mm heavy duty springs, Dual batteries,
140 ltr fuel tank,Custom 60ltr water tank, draws, cargo barrier, bull bar, IPF spotties, UHF.
Gland fittings..... ive got 2 on my roof and have never leaked or rusted if installed properly. You can also use bulkhead detchus fittings but thats $$$$
Sent from my SM-G935F using Tapatalk
Posting Permissions
Reply With Quote