OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 41

Thread: GU Drivers side seat belt doesnt retract properly.

Threaded View

  1. #11
    Patrol Freak BillsGU's Avatar
    Join Date
    Jul 2010
    Location
    Thurgoona
    Posts
    1,224
    Thanks
    40
    Thanked 601 Times in 389 Posts
    Mentioned
    7 Post(s)
    Tagged
    0 Thread(s)
    I had the same problem with no part numbers years ago so I rang them. They initially said that they did not carry the ST Patrol belts because their data base said the ST Patrol has pre tensioners on the front belts and the item they stocked which would fit did not have pre tensioners. I pulled my retractors out and they did not have pre tensioners. Its easy to tell as they will have an electrical harness going to them if the have.

    I called them back and ordered the non pre tensioner ones for the Patrol - and as I said - they have worked fine for years.

    Just make sure you get the correct ones if you have a single cab. They are different to the wagon as they sit at a slightly different angle and if you install the wrong ones the belts will be forever locking up when you try to put them on (like they do when you park on a slope and try to put the belt on).

    Give SeatSafe a call. I found them very helpful.

  2. The Following 3 Users Say Thank You to BillsGU For This Useful Post:

    DX grunt (3rd January 2017), mudski (2nd January 2017), Patrol-Guy (3rd January 2017)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •