BigRAWesty (5th October 2016), Rossco (5th October 2016), Stropp (5th October 2016), Woof (5th October 2016)
Picked up the engine today!!
Avo (17th October 2016), BigRAWesty (17th October 2016), gubigfish (17th October 2016), Hodge (17th October 2016), jay see (17th October 2016), Maxhead (17th October 2016), mudnut (17th October 2016), MudRunnerTD (17th October 2016), mudski (17th October 2016), NissanGQ4.2 (17th October 2016), Plasnart (17th October 2016), Rossco (17th October 2016), Sherro (17th October 2016), Stropp (17th October 2016), Touses (17th October 2016), TPC (17th October 2016), Winnie (17th October 2016), Woof (17th October 2016)
Ooh yeah baby. One major step forward ☺
Going to be a bit of stuffing around to get this to work but all good.
It's a Ti engine so there's a little indentation where the tacho sensor goes so mine is no good.
I need to decide what to with the vac pump hole under the injector pump, I guess I can just make a plate up and block that hole.
Make up a new oil feed line for turbo
Old gaskets from my GQ are fun.
I need to get this new flywheel lightened 1.5-2kg and balanced with the clutch yet again.
Need another spigot bush
Oil drain.
Remove old gaskets from new engine.
Fix 3rd injector that we had issues with on my old engine.
New belts, gaskets, oil cooler kit, etc
New dipstick
Oil and filters
Check clutch alignment holes
growler2058 (17th October 2016), MudRunnerTD (17th October 2016), mudski (17th October 2016), Rossco (17th October 2016)
Why can't you use the original fly wheel off your motor, are they different? ?
Ah yeah rodger that. Bit of a bugger spose it won't be ready to drop in on the weekend then . .
If ya wanna hand with anything mate just yell out. Im close to finishing the house so maybe have some spare time soon.
Sent from my GT-N7105T using Tapatalk
AB (18th October 2016)