Quote Originally Posted by Cuppa View Post
Hi, yes I copied Macca with the Speedflow adaptor. It screwed straight in with no need for any drilling & tapping. Easy & convenient. It was 12.mm x 1.5 pitch. See pic below for part no. In normal use my coolant temp reads 80 degrees, rising to 90 degrees in hotter weather & under load.
screenshot_823.png


IMG_7666.jpg
Cuppa, is that adaptor with the redarc 1/8" temperature sender? Fit ok? Does the probe stick out of adaptor far enough to reach coolant?

Sent from my SM-G900I using Tapatalk