Quote Originally Posted by MudRunnerTD View Post
This is my Outback Touring Roof load.



My rack is full length Alloy

There is an OzTent RV5 on the right side. A roof top bag with spare Tyre, parts, exhaust jack and some tools at the front.



I made this box out of 19mm pine cause I had it. It's glued and screwed and should paint it but never have. The base spans full width to carry the load across the Alloy rack. Underneath the rack is some 70x19 spanning too and screwed up through the rack to clamp in position. She ain't going anywhere!!!





Ratchet strap through the handle and it's solid and no vibration at all.



It works bloody well for 60lts. Of fuel.


Sent from my iPhone using Tapatalk cause AB turned it back on!!
Hey thanks so much for this reply MudRunnerTD, I really appreciate you taking the time to post the photos and the write up, that's a great help.

You do what I'm planning on doing, but I was only thinking of 2 jerrys, maybe I'll go with 3 now.

You've all been fantastically helpful, thanks heaps.