Hi Guys, got around to fitting a Winch to the GU as you can see by pic's it was pretty much easy ,but making it all fit wasn't to hard in all around 4 hours ..
Hi Guys, got around to fitting a Winch to the GU as you can see by pic's it was pretty much easy ,but making it all fit wasn't to hard in all around 4 hours ..
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
Bloodyaussie (1st February 2016), garett (31st January 2016), MudRunnerTD (31st January 2016), NissanGQ4.2 (31st January 2016), Rock Trol (31st January 2016), rusty00 (21st March 2016), threedogs (31st January 2016)
Bloody hell. Nice job. Well done.
Sent from my SM-P600 using Tapatalk
altech (1st February 2016)
Very neat.
Where did you get the winch cradle from? Is it 6mm or 8mm steel?
2007 DX CRD Wagon - EFS 2" lift, BOSS Chassis Brace Kit, Steel Bull Bar, Runva 9500-Q winch, FyrLyt's, Rock Sliders, Rear bar with wheel and twin jerry carriers, Drawers, Fridge slide, dual battery, Red Arc BCDC 1220, Red Arc EGT/Boost gauge, Scangauge, Uniden UHF, Prodigy P2 brake controller, CC Intercooler, Pacemaker 3" zhaust, HPD Dawes, ECU Remap.
altech (1st February 2016)
Very neat job indeed
altech (1st February 2016)
hi Rock, Ebay $295 and 8mm , pretty heavy too. cheers AlexOriginally Posted by Rock Trol
Rock Trol (14th March 2016)
That looks neat!
altech (16th March 2016)
Put a hinge on your number plate and put it back in the middle and no one would know it was there - until you needed it!
altech (16th March 2016)
Very nice,,,,,,,, I think they used springs on the Hinges
You could drill and fit and eye nut or bolt to store the hook.
Just saying
Last edited by threedogs; 15th March 2016 at 01:00 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
altech (16th March 2016)
Hi Altech, Do you know the eBay supplier for the cradle?
Cheers
2012 GU8
Hi Rus, Sorry not from Ebay , i just did Google search and I think I use this supplier - http://www.nissangupatrol.com/produc...alloy-bullbar/
Or there are some ebay ones too http://www.ebay.com.au/itm/GU-Patrol...kAAOSwx-9WubR6
http://www.ebay.com.au/itm/GU-Patrol...4AAOSwECZUrGM5
http://www.ebay.com.au/itm/GU-Patrol...7YP6UTievn59lQ
pretty sure there are the same Guy , hope this helps cheers Alex
Posting Permissions
Reply With Quote