Whats best

[nissannewby]

On powerlines we use 95mm2 as bare minium for 200A circuits, for wiring up transformers secondary voltage. Anything up to 185mm2 feeding 400A circuits. DC is probably different. And I'm sure there is also different grades of copper is there not.

Dc is different mate. Usually the lower the voltage the higher the current needs to be.

[Winnie]

I would have cursed the engineer for that shit.

Underground supply to a shed with a small pump.
From memory it was about 800m

[Ben-e-boy]

Dc is different mate. Usually the lower the voltage the higher the current needs to be.

Thats with everything.

[Ben-e-boy]

Underground supply to a shed with a small pump.
From memory it was about 800m

Yeah, with a subboard is alright.... It's when you're expected to terminate it into the gpo....... I have been there

[Winnie]

Ah, no, that was not expected lmao

[Punderhead]

Not the best Piccies sorry. But I have my high mount hard wired in. The solenoid is a full waterproof jobbie, currently mounted behind the bullbar. (Plans to move it somewhere more out of the elements.

I have the two switches, mostly in case I accidentally bump it while going for the reversing lights.

Cheers.


Sent from my iPhone using Tapatalk

[sooty_10]

These are mine. In/out toggle with isolator switch next to it. Left hand side of steering wheel.

Sent from my SM-G925I using Tapatalk

[Plasnart]

Underground supply to a shed with a small pump.
From memory it was about 800m

That makes sense then. I was about to call BS!

[mudski]

This is something i need to do. But the wired hand controller on mine has four wires in it. All others ive seen have three.
Unless its different in the winch control box....

Sent from my SM-P600 using Tapatalk

[Sir Roofy]

This is something i need to do. But the wired hand controller on mine has four wires in it. All others ive seen have three.
Unless its different in the winch control box....

Sent from my SM-P600 using Tapatalk

We'll open mine over the w/end and have a look see