Heavy duty swaybar

[Dougy]

Hey guys, I recently received a Superpro 24mm heavy duty rear swaybar for my 2011 gu wagon. Also I got the left and right extended links from patrolapart. Only prob is the original d bush saddles are too small, do I need to get different saddles? Does the new swaybar fit in the same spot as the original? Also where the links attach to the chassis there seems to be a removable bracket, not sure if I need to remove them to mount the new longer links. Seems like the new links will hang quite low otherwise.

[MudRunnerTD]

Are the new links adjustable? Did you specify how much lift you had when buying the links? I'm have a 24mm rear seat bay, it's awesome. You should be setting your link length so the arms of the sway bar are flat and horizontal.

Sorry I can't remember about the saddles. I thinkminecame with appropriate bushes to fit the existing saddles.

[Dougy]

They are adjustable links, supposed to fit a 2" to 8" lift. Mines 2". I was gonna use them on the shortest setting hence having a 2 inch lift. I'm gonna ring them today anyway as the swaybar is the wrong one I think, as it's a different shape to the original and it's going to touch the diff housing. Think I will have to remove the extended link brackets on the chassis for the new longer links as the swaybar will angle down a fair way instead of being horizontal.

[MudRunnerTD]

They are adjustable links, supposed to fit a 2" to 8" lift. Mines 2". I was gonna use them on the shortest setting hence having a 2 inch lift. I'm gonna ring them today anyway as the swaybar is the wrong one I think, as it's a different shape to the original and it's going to touch the diff housing. Think I will have to remove the extended link brackets on the chassis for the new longer links as the swaybar will angle down a fair way instead of being horizontal.

Doesn't sound right to me. Hit them up for the bushes too mate. I am positive I got the bushes, I must have! Must fit in the factory saddles I think.

[Dougy]

Rang them and yep they sent wrong one, the new one should fit with original saddles. Just have to wait till it gets here!

[sooty_10]

They are adjustable links, supposed to fit a 2" to 8" lift. Mines 2". I was gonna use them on the shortest setting hence having a 2 inch lift. I'm gonna ring them today anyway as the swaybar is the wrong one I think, as it's a different shape to the original and it's going to touch the diff housing. Think I will have to remove the extended link brackets on the chassis for the new longer links as the swaybar will angle down a fair way instead of being horizontal.

You may even have to trim the thread to length to suit your lift height.

Sent from my SM-G925I using Tapatalk