What did you do to your Patrol today!

[BigRAWesty]

Started the exhaust lol.. couldn't help myself..
So far so good

[mudnut]

Finally got the EGR pipe fitted to the headers.

[Bacho86]

Started the exhaust lol.. couldn't help myself..
So far so good

How many times did you soak the studs? Good luck!!

[BigRAWesty]

How many times did you soak the studs? Good luck!!

Ummmmmm. .. twice..
Actually most of em were loose.. which isn't good..

[BigRAWesty]

How many times did you soak the studs? Good luck!!

In 3 hours I've removed pipe work around the turbo, the catch setup, removed actuator to remove the heat shield, remived flex section of exhaust, old dump pipe, tried fitting new dump pipe, had to remove sway bar, fitted dump pipe and so far all good.
Refitted actuator and sway bar..
So tomorrow it should all be smooth sailing..

[Hodge]

Well done bloke. So far you're way ahead of where I was at that stage. I can't recall removing the sway bar though .

[Bacho86]

Ummmmmm. .. twice..
Actually most of em were loose.. which isn't good..

No I wouldn't think so...

In 3 hours I've removed pipe work around the turbo, the catch setup, removed actuator to remove the heat shield, remived flex section of exhaust, old dump pipe, tried fitting new dump pipe, had to remove sway bar, fitted dump pipe and so far all good.
Refitted actuator and sway bar..
So tomorrow it should all be smooth sailing..

Good work, sounds like it's all going to plan then !! When you going to attack the heat shield?

[BigRAWesty]

It's out..

Was a carnt.. all the heater hoses over the top of it I have to remove the actuator to get it out..
That's what I've achieved this arvo..
Tomorrow I reinstall the intake and finish the rest of the exhaust fit out..
Dump pipe fit perfectly..

[Chappy]

Mounted up the roof top light bar. Now the fun job of wiring it in..

[Bacho86]

Put the mud tyres on ready for next weekends high country trip!




Sent from my iPhone using Tapatalk