Roofys Motor Discussion thread

[mudski]

Who was the price or where was it coming from? . . . Markie?
What about agr plates where do we source them? . . .

Is the pressure plate dual mass or solid? Id have to ring and find out but i think a kit with flywheel is about $700. I think. Egr plates Roofy will have the old one and you only need to block it at the manifold, or on the egr pipe at the rear lower right side of the motor.

Sent from my SM-P600 using Tapatalk

[Rossco]

Is the pressure plate dual mass or solid? Id have to ring and find out but i think a kit with flywheel is about $700. I think. Egr plates Roofy will have the old one and you only need to block it at the manifold, or on the egr pipe at the rear lower right side of the motor.

Sent from my SM-P600 using Tapatalk

It's a Dual mass one. Omar said to block both ends is best, does that sound right? . . .

[Sir Roofy]

It's a Dual mass one. Omar said to block both ends is best, does that sound right? . . .

I only blocked the top that was 4yrs ago

[mudski]

It's a Dual mass one. Omar said to block both ends is best, does that sound right? . . .

No point in blocking both ends. Its blocked totally with one plate.

Sent from my SM-P600 using Tapatalk

[Rossco]

No point in blocking both ends. Its blocked totally with one plate.

Sent from my SM-P600 using Tapatalk

Yeah that's what i kinda figured but builder said do both. Guess it's over engineering but sometimes that's not a bad thing . . .

[mudski]

Yeah that's what i kinda figured but builder said do both. Guess it's over engineering but sometimes that's not a bad thing . . .

If you want to add another plate i would add one on the egr pipe itself. I have them here if you want to put one on.

Sent from my SM-P600 using Tapatalk

[matfew]

woohoo roofy I've missed this thread completely.

Things have taken a big step up since we picked it up good on ya Rosco.

[AB]

Only just catching up on the forum too, great work Rossco.

You must be pumped Roofy, look forward to seeing it back on the road!

[Sir Roofy]

Only just catching up on the forum too, great work Rossco.

You must be pumped Roofy, look forward to seeing it back on the road!

I'm really stoked mate but not as much as Jane-o she's excited beyond believe
when the motor pulled the pin we were both pretty devastated as we had been
planning our trip for quite a while thanks to the generosity of the Forum
we might just make it and the work that Jonathon and Rossco and Mark is more
than Awsome and now the count down begins till were mobile again

[rusty_nail]

I'm really stoked mate but not as much as Jane-o she's excited beyond believe
when the motor pulled the pin we were both pretty devastated as we had been
planning our trip for quite a while thanks to the generosity of the Forum
we might just make it and the work that Jonathon and Rossco and Mark is more
than Awsome and now the count down begins till were mobile again

Still no idea when the transplant will be happening mate? Sounds like it will be quite close to the end of my honeymoon it will take some serious convincing with the missus to be there lol

Sent from my Nexus 5 using Tapatalk