can you remove the lever bit and see if it is connected ?
can you remove the lever bit and see if it is connected ?
if its worth doin its worth over doin
have you looked at this ? http://www.nissanpatrol.com.au/forum...(how-to-guide)
is it the same ?
if its worth doin its worth over doin
growler2058 (3rd March 2016)
should be able to pull the lever out and feel if it is connected. if you can't pull it manually get your angle grinder out.... cut the roof off :P
if its worth doin its worth over doin
growler2058 (3rd March 2016)
this may help too. http://www.patrol4x4.com/forum/nissa...nt-open-28417/
not sure if you looked or not but hope it helps
if its worth doin its worth over doin
growler2058 (3rd March 2016)
I don't remember ever seeing Boss Hogg doing that Clunk.
image.jpg
Last edited by Chubba; 3rd March 2016 at 03:11 PM.
Clunk (4th March 2016), growler2058 (3rd March 2016), rusty_nail (4th March 2016)
I can see you loving this CRD Patrol,
go out and buy another "Agatha" never
had these probs eh
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
growler2058 (3rd March 2016)
You probably don't want to read this Growler, but when you do you'll probably wish you'd read it sooner.
http://www.nissanpatrol.com.au/forum...-DX-door-locks
2006 4.2TDi ex-Telstra Remote area Camper. Patrol Sold after 11 years of ownership Replaced with 2006 OKA NT Expedition Truck. Cummins, Allison & lots of goodies
A Nomadic Life (Blog)
BigRAWesty (3rd March 2016)
BigRAWesty (3rd March 2016)