Ok so you mean: course, medium then low grit cutting compound?
. Apply course then buff off, medium then buff off low then buff off then a good quality polish and buff off?
>>>tappin from tassie
Ok so you mean: course, medium then low grit cutting compound?
. Apply course then buff off, medium then buff off low then buff off then a good quality polish and buff off?
>>>tappin from tassie
Last edited by taslucas; 25th February 2016 at 09:33 PM.
Hello from Under Down Under!
Yup.... Give it a goOriginally Posted by taslucas
Obviously you start with the least amount of cutting you think you'd need but looks like it needs a bit of work. So start coarse if it comes up all alright you might be able to skip medium
Or if you just wanted to test it out
Meguiars ultimate compound followed by ultimate polish. See what it comes up like you might be happy enough not to do any more
Lucus30's 1999 GU ST TB45E
taslucas (26th February 2016)
I've got these. Any good?
>>>tappin from tassie
Hello from Under Down Under!
Give em a try. Do a little patch at a time see how it comes up. If your happy move on and do the next patchI've got these. Any good?
>>>tappin from tassie
Lucus30's 1999 GU ST TB45E
taslucas (27th February 2016)
Yo Lucas I filled in a scratch with a clear pen but it needs sanding back.
I have a hi density foam sanding block, just go slowly with some 1500/2000
then polish ???
Last edited by threedogs; 26th February 2016 at 04:57 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Hoping the cut and polish is not too harsh?
>>>tappin from tassie
Hello from Under Down Under!
Does it say what grit it is? Other then number 2?
1999 GU DUAL FUEL 4.5 - 2" OME - 33's KM2s - SNORKEL - CUSTOM DINTS.... Goes by the name Candy (the car not me)
Is there anything you can do when it is just old as per the photo to protect it from getting worse? Can it be made to look any better. I can't afford a respray. This isn't every where but obviously worse on the bonnet.
Attachment 65121
In the Kitten range There is a cutting compound in a black can (coarse with no wax or polish), No2 in a red can (medium with wax, polish), No1 in a green can (fine with wax, polish).
Graham
Last edited by GeeYou8; 28th February 2016 at 08:05 AM. Reason: Added can colours.
Well I'll give the kitten stuff a go this evening when it cools down and finish with the meguires
>>>tappin from tassie
Hello from Under Down Under!
Posting Permissions
Reply With Quote
