What did you buy today

[threedogs]

Got my trolley for the mig today. 60bux with postage. Ordered friday arvo and it turned up today.
Even enough room for the old arc too. Lol

Sent from my GT-N7105T using Tapatalk

They are a great welder for rhs not quite big enough to run 3.2 rods, I swapped mine for a trans arc 240/415v model
But big enough to weld most light jobs, now I use neither and use my inverter boy can that push a 3,2 rod and its not that
big but very light

[threedogs]

Reversing camera..
The extra few bucks has paid off..
It's tiny and alloy case..

I drilled a hole in the black Patrol panel on the small door, and fed the wires up
the rubber sleeve looks OE, IMO

[threedogs]

Some 4mm x 5 core trailer wire has arrived, this is so I can sort the lighting on the roof.
Ill be using 5 pin weatherproof plugs so it can all be isolated and serviced if required

[growler2058]

Sent from my iPhone using My thumbs

[threedogs]

and the $$$$$ were ?? is it a 1600cc motor as well

[Bloodyaussie]

Sent from my iPhone using My thumbs

Ha ha ha ha..... you were on a mission to get one thats for sure.... well done.

[Winnie]

Very very supa cool G dog!

[mudski]

They are a great welder for rhs not quite big enough to run 3.2 rods, I swapped mine for a trans arc 240/415v model
But big enough to weld most light jobs, now I use neither and use my inverter boy can that push a 3,2 rod and its not that
big but very light

That arc does 3.2's without an issue. Ive had it for 20 years too. Lol its only selections are 2.5 or 3.2....ill get the link for thst trolley too Lucas....

Sent from my SM-P600 using Tapatalk

[taslucas]

Sent from my iPhone using My thumbs

Ls1 time?

>>>tappin from tassie

[growler2058]

and the $$$$$ were ?? is it a 1600cc motor as well

I think its a 1500 just doing some checks now on another forum (SSSHHHHHHH Dont tell AB)
Gunna get 30x10.5 on the rear, theyre 10" rims