I had another go at bracing the large rear door. A previous owner had cut a huge oval hole to install a speaker. They had seriously weakened the door, so I welded up a bracket
last year. The door would start to creak while on rough roads, so I drilled some more holes on the pressed steel near the hinge and bolted the bracket to it.
Sorry, no pics.
Now to take it bush and see if it has worked.
My advice is: not to follow my advice.
Stropp (5th February 2016)
new overflow, sealed up washer bottle and new spring mats.
if its worth doin its worth over doin
Started to build the new sliders /side steps for the big girl as well as a set for a mate as well
Cheers Rod
_______________________________________________
Bitumen ...... Another watse of public funds
My Build 2005 TD42TI
BigRAWesty (7th February 2016), gaddy (9th February 2016), Hodge (10th February 2016), Stropp (10th February 2016), threedogs (8th February 2016)
Started my build of a two drawer system for my GU, got the locking handles on today and have painted the drawers, tomorrow is marine carpet day, as well as lining up the locking bars, should be done in a few days then I'm off around Aussie.
dummy wired up my new Volt gauge to see how it looks.
Must say Im liking it for the price. I have the same make water temp
gauge opposite the central clock. Main battery only ,have a seperate gauge for the AUX
Not to bright for night driving as well IMO
Last edited by threedogs; 10th February 2016 at 01:14 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Ow I three the egr block in..
Was grinning ear to ear..
Even has a turbo note now..
Next up.
Scangauge, egr gauge, exhaust and primary fuel filter with water trap
Cheers
Kallen Westbrook