24mm Heavy duty front sway bar. Now the Bus doesn't nose dive into every corner.
Might have to do the rear now.
Sent from my SM-P600 using Tapatalk
24mm Heavy duty front sway bar. Now the Bus doesn't nose dive into every corner.
Might have to do the rear now.
Sent from my SM-P600 using Tapatalk
jay see (30th January 2016)
Well how many bikes do you have now?Originally Posted by Stropp
Is that because of the extra weight up front.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
what s a sway bar ?
i only got one on the rear ... its how i found it
if its worth doin its worth over doin
BigRAWesty (31st January 2016), rusty_nail (1st February 2016)
Nah its always dug into the corners. There for giving more body roll. I never liked it. The 03 models i think onwards went to a larger oem sway bay than mine, and yours. I was given some later radius arms, i didnt realise this at that time, but the sway bar mounts on the radius arms are different too. So i put new bushes in the arms, getting them ready for a change over, i change them over, then go to bolt up the sway bar and the bloody brackets dont match up.
So i had to get the later brackets to suit, then the bushes that suit the later brackets dont match. Ugh.
So i fabricated something up until i found the right bar. And one came my way, cheaper and better than OEM so im happy.
Id love to run the Superior Hybrib radius arms, much better setup than the Nissan style, and their Superflex bars, but thats 2k gone in arms and two bars.
Sent from my SM-P600 using Tapatalk
jay see (31st January 2016)
20L Castrol RX Diesel, 2 filters, 20L Drum Oil Pump, 1 hand ratchet
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
Picked up an old jayco dove on the weekend.
BigRAWesty (1st February 2016), Clunk (1st February 2016), Winnie (1st February 2016)
Whoah nice one Rossco! What's the plan for it?
Spring over & 35s!!
Nah need to hook it up to the GQ see how it sits might give it a slight lift. Needs a bit of love but pretty good really for its vintage, always need a project. Will be good for mild bush access and a bit of touring. . . Might see if i can get it up Ellis on the weekend. . . Wink
rusty_nail (1st February 2016), Winnie (2nd February 2016)
It will pull the patrol up Ellis mate!
Posting Permissions
Reply With Quote
