threedogs (20th January 2016)
@ Stropp or any others with the later model CRD GU can I get you to
run a tape on the centre console [arm rest] switch panel and see what you get.
The Di is 230mm x 30mm, see previous post for location.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
The gq..
The gq has the power mirrors control in this pannel.. so not sure how that'll work..
Cheers
Kallen Westbrook
growler2058 (20th January 2016), threedogs (20th January 2016)
Thats great thanks not all have power windows Id say.
204 x 35mm would fit. can fit 3 x carling in that panel
Good to see you have inches on your tape, lol
So I have the GQ and Di covered .
I see you have a dog to or a cat
Last edited by threedogs; 21st January 2016 at 03:45 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
You looking to overlap behind or insert to front??
Cheers
Kallen Westbrook
Gu 08
Had a slanted top to it
![]()
Cheers
Kallen Westbrook
growler2058 (20th January 2016)
Ripper the later panel is the same, not worried about that small angle.
You'll hardly notice it once the replacement panel is in place.
I get 230 can you measure from the 100mm mark and see what you get please, TIA
You need a stiff paint brush on the GQ to clean all the dog hair lol
You can either pop rivet or glue this new panel on from the front
Last edited by threedogs; 20th January 2016 at 02:18 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
BigRAWesty (20th January 2016)
Yep. 230 same as you
Cheers
Kallen Westbrook
threedogs (20th January 2016)
@ Kallen OOI is your panel blank mine is for an ST
I wonder if the more up speced ones use those knock outs.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there