-
11th March 2015, 04:04 AM
#31
Patrol Goddess
And, if you're a bit simple ( like me), are fitting to a series 1,2,or 3 and plan to leave the carpet in, you still have to pull the carpet back to access bolt hole for rear passenger side. Use the black bolts, not the silver ones, and the drawer with the cut outs go under the fridge slide.
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
-
-
11th March 2015 04:04 AM
# ADS
Circuit advertisement
-
11th March 2015, 05:48 AM
#32
SPAMINATOR
Originally Posted by
katwoman
And, if you're a bit simple ( like me).
Bit??????!
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
-
The Following User Says Thank You to growler2058 For This Useful Post:
BigRAWesty (11th March 2015)
-
11th March 2015, 06:11 AM
#33
Patrol Goddess
Originally Posted by
growler2058
Bit??????!
Yeah, ok ALOT, R Sole.
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
-
The Following 2 Users Say Thank You to katwoman For This Useful Post:
growler2058 (13th March 2015), Stropp (13th March 2015)
-
13th March 2015, 06:43 PM
#34
Just fitted a set, very happy for $895 and received in just over a week.
Just a quick photo to throw up in case it helps someone with the install in a series IV.
titan drawers.jpg
I mounted my fixing points more towards the front of the vehicle using the baby seat bolts and the front cargo tie down points. I would have only picked up one of the rears if I had it mounted further back and didn't want to modify it to much.
Still feels solid as and I think it will help with the cantilever when all the drawers are pulled out.
Cheers,
Bob
-
The Following 2 Users Say Thank You to bobby dazzla For This Useful Post:
Clunk (13th March 2015), Stropp (13th March 2015)
-
13th March 2015, 09:18 PM
#35
Patrol Goddess
Originally Posted by
bobby dazzla
Just fitted a set, very happy for $895 and received in just over a week.
Just a quick photo to throw up in case it helps someone with the install in a series IV.
titan drawers.jpg
I mounted my fixing points more towards the front of the vehicle using the baby seat bolts and the front cargo tie down points. I would have only picked up one of the rears if I had it mounted further back and didn't want to modify it to much.
Still feels solid as and I think it will help with the cantilever when all the drawers are pulled out.
Cheers,
Bob
Nice. Maybe stick up an introduction for you and your bus now ? Something polite asked of all new members. Welcome, BTW.
KATROL- The 2nd
GU TD42TGi
Not as pretty, but a whole lot tougher
Silent member 1208
Yes Michael, I bought a JEE.....60.
-
The Following 2 Users Say Thank You to katwoman For This Useful Post:
BigRAWesty (13th March 2015), growler2058 (13th March 2015)
-
22nd June 2015, 10:27 PM
#36
Hi Guys and Girls I'm new to this forum and the Patrol family with my recent purchase of a new Patrol. I'm looking at the titan draws and reading all your comments. only thing that has me thinking twice is the weight. Are they too heavy? Once you load the draws up with a fridge and a battery. I'm worried I might loose fuel economy and power.
-
-
22nd June 2015, 10:54 PM
#37
Originally Posted by
Dave Day
Hi Guys and Girls I'm new to this forum and the Patrol family with my recent purchase of a new Patrol. I'm looking at the titan draws and reading all your comments. only thing that has me thinking twice is the weight. Are they too heavy? Once you load the draws up with a fridge and a battery. I'm worried I might loose fuel economy and power.
Ha, I have a TB48 so I already don't have economy and am not at all concerned about losing power. :-) But seriously, I love these drawers. I now have my second battery mounted in a box on them, and a DC-DC charger. The Fridge lives there almost permanently and the draws are full of all sorts of goodies that normally would be lost in the shed or floating loosely around in the back. Just couldn't be without them now.
2009 GU6 ST-L TB48DE - BUSHMAN FRIDGE, Tigerz-11 Awning, TITAN DRAWERS, TJM Bullbar, Warn Winch (trying to work out what version, and then find a manual)... Not much else YET ! ! ! But a near endless list of wants.
-
-
23rd June 2015, 07:51 PM
#38
Patrol Guru
Attachment 59125
Originally Posted by
mudski
Anyone know if these will fit if you have a barrier?
Mine fit with the cage.
-
-
24th November 2015, 08:33 PM
#39
Advanced
Just saw they are on sale for $695 at the moment! Wish i realised that before bought material and started building my unit this morning.
-
The Following User Says Thank You to juzzs8 For This Useful Post:
lucus30 (24th November 2015)
-
24th November 2015, 08:40 PM
#40
Hardcore
Originally Posted by
juzzs8
Just saw they are on sale for $695 at the moment! Wish i realised that before bought material and started building my unit this morning.
Starting to get pretty cheap. Might have to look at these one day
Lucus30's 1999 GU ST TB45E
-