Shes pretty much finished... just need to make up 4 inch intake frm throttlebody back to the airbox... then its off to get exhaust and engineering done hopefully end of the week...
Sent from my SM-N915G using Tapatalk
Shes pretty much finished... just need to make up 4 inch intake frm throttlebody back to the airbox... then its off to get exhaust and engineering done hopefully end of the week...
Sent from my SM-N915G using Tapatalk
BigRAWesty (10th November 2015)
Shit yea. What a build..
Cheers
Kallen Westbrook
mullet_hunter (10th November 2015)
Will post up a vid soon..
Sent from my SM-N915G using Tapatalk
wow... read this whole thread, as i was reading it became suspenseful and all i wanted was a vid of it in action and then i arrive here lol.
what a bummer... ah well... subscribed! :P
2001 GU II ST, 3.0di, Auto, All NADS done, Nissan Snorkel, 50mm Lift, 35's....
mullet_hunter (10th November 2015)
Haha il upload a vid soon.. hopefully can get my zaust done tomorow.. then i can finally drive it.. im pretty tempted to have a blast arnd the block but im still only running just open headers.. so shes loud as...
Sent from my SM-N915G using Tapatalk
Yea man hold back - be a shame to get a canary without having any road time.Originally Posted by mullet_hunter
2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder
And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.
Did a bit this arvo.. Mockd up my air intake.. finally got all my electrics sorted.. had a problem with my fuel pump blowing fuses but thats all sorted nw.. was basically earthing out my bulkhead fitting frm the pump.. ie it was making contact with the body when i bolted the tank back up in place.. causing it to arc out.. so i fliped the bulkhead fitting.. had the excess thread going into the tank and the head of the bolt on the top side of the tank... there were like 3 or 4 wires i had to tap into to get everything working mickey mouse.. tacho for dash.. power to ecu and a switch and light setup to manually overide ecu to turn thermo fans on and off for river crossings etc.. was a bit tricky as ecu controls when thermos come on and off... anyways everythings working as per normal on the dash which im pretty happy with.. temp.. oil.. speedo.. tach etc..
Did a final solder of wires and taped up loom... bolted up ecu and fly by wire module up under dash.. happy days..
Sent from my SM-N915G using Tapatalk
Sent from my SM-N915G using Tapatalk
Ok for some reason it wont let me post or upload a vid.. anyone nw hw?
Sent from my SM-N915G using Tapatalk
Simplest way is to up load to photo bucket or whoever and then link it in
Cheers
Kallen Westbrook
mullet_hunter (11th November 2015)
Posting Permissions
Reply With Quote
