old thread but if u crack the filters till they're loose (but not dropping oil) and then pull the sump plug 99% of the time doin this will suck oil from the filters. so after u drain the sump and put the plug back in when u take the filters off they shouldnt drip any oil. give it a try and let me know how you go
Old thread. Was just speaking to mudski about it this morning ... Next time I do the filters, I'll throw a jack passenger side of car and jack it up, it'll help with retaining the oil in the filters.
Like to see the pics please.Originally Posted by MudRunnerTD
Still have that spare tray ??.
No pollution gear ex factory, interested in this idea for sure.
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
The Trays are made by Chicken who is a vendor I think on P4x4. I tried to get him over here but oh well.
He has now made a tray to suit the TD42Ti motor too and Stropp and I were Beta testers for it.
I now have a Chicken Tray on both my TD42s and they are AWESOME! Bastard to fit but wicked at what they do.
I will have to check if I still have the spare? I think I gave it to AB when I fitted his winch up?
Sent from my iPhone using Tapatalk cause AB turned it back on!!
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Nop I don't know what you're talking about
The mighty GU CRD comes with a factory tray and drain hose. I will never be in the shit for oiling the lawn again!! Now for a way not to poison the lawn with coolant
Sent from my iPhone using My thumbs
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
BigRAWesty (29th October 2015), mudski (30th October 2015)
Like the look of it indeedeee.
How much?.
would be sweet to installwhile engines out but going back in this weekend,
touch wood
PM
IF IT'S NOT A NISSAN.
THEN IT'S A COMPROMISE
I think they were around $105 from memory.
Robo (30th October 2015)
Correction $115. Here is his thread.
http://www.patrol4x4.com/forum/suppo...ll-tray-72396/
Robo (30th October 2015)
I made mine from a piece of Trimdek guttering before I put the engine in.
There's a lot less room with the big Ebay starter motor.
I had to braze in a copper elbow and then ran a copper downpipe around the starter.
Once the engine was in, I had to remove the 2 filters to fit the starter so it was a good test. Worked a treat..
...
IMG_3030.JPG
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
mudski (30th October 2015)
Posting Permissions
Reply With Quote
