Use tube if you want it stronger not pipe.
Use tube if you want it stronger not pipe.
Lol. Theres a difference? Goes to show how much i know.Originally Posted by nissannewby
Sent from my SM-P600 using Tapatalk
Having said that, would it be ok to weld on bends? Or use a bender?
Yes there is. Tube is od. Pipe is id. Thickness with tube will be referred to as "schedule".
BigRAWesty (22nd October 2015)
Decent schedule tube cant be bent on a small bender though.
Ok so welding is fine. I can weld but i wont be welding i think. I will tack it all together when time comes to do this, but i will get my mate who welds for a living to do it for a neater finish.
Sent from my SM-P600 using Tapatalk
I used 40nb for the top rail of winch bar.. with 12mm side plates with the recovery points..
I may or may not have nosed a stobie pole when chucking a u turn after first fitting it..
The bar didn't Budge lol
Cheers
Kallen Westbrook
Good tube is ideal, 40nb 3.2mm wall is cheap and can be bent in a small bender, just keep the seam on the inside of the bend where possible
96 GQ coil/Cab
08 G6eT
BigRAWesty (23rd October 2015), mudski (22nd October 2015)
Yep and plenty strong. I just like to throw spanners around lol.
Do something different and make it out of 6mm wall 6061 ally tube
Last edited by nissannewby; 22nd October 2015 at 09:01 PM.
Nows theres an idea. Only thing is ally tube would look crap on a white patrol i reckon. Unless i paint it. Steel is fine for me.
Sent from my SM-P600 using Tapatalk
And the price will scare you lol.
BigRAWesty (23rd October 2015)
Posting Permissions
Reply With Quote
