Cheap longrange Aux Subtank

[peterbr1]

well I don't mean to sound bad

[mudski]

FWIW Peter. My GU long range sub tank is different to yours. The top section on yours looks taller than mine.

Sent from my SM-P600 using Tapatalk

[peterbr1]

Ok that would be the expansion chamber I think

[peterbr1]

Must have been hard to find domething to type for you 25th post hey

I plan on playing with the tank tomorrow and I need help hence the manual but im feeling its now worth it from the great feedback im getting (oh and im not being sarcastic) I really appreciate the advice

[mudski]

Ok that would be the expansion chamber I think

Maybe, i have the same sorta section on mine, but its not a tall as yours. Im tipping its not gonna fit. It takes arou d an hour to remove the oem tank so you could remove it and see. I had to fab up a bracket for the rear inner section but Bunnings came to through with what i needed.

Sent from my SM-P600 using Tapatalk

[peterbr1]

if that's the case then I could chop it and weld it up

[mudski]

If thats the only thing stopping you from fitting it up. Then yeah i suppose.

Sent from my SM-P600 using Tapatalk

[peterbr1]

i.ll keep trying I cant afford $900 plus for a tank just need to find out what the holes are for 1 is for quick fill 1 Is vent and 1 for transfer to main tank I think

[mudski]

Looking at the pic i reckon i wont fit. On mine theres a cut out section on the end where the tank sits around the right hand top control arm. Plus you need bent upper control arm fitted too. So it doesnt hit the tank when that side of the diff is flexed.

Sent from my SM-P600 using Tapatalk

[AB]

i.ll keep trying I cant afford $900 plus for a tank just need to find out what the holes are for 1 is for quick fill 1 Is vent and 1 for transfer to main tank I think

I still can't find that image but this will help.