If anyone cares, the following come from my workshop manual:
Idle speed 147 kPa 21.3 psi
2,000 rpm 539 kPa 78.1 psi
4,000 rpm 736 kPa 106.72 psi
So if you plan on installing an oil pressure gauge, make sure it will handle > 100 psi
If anyone cares, the following come from my workshop manual:
Idle speed 147 kPa 21.3 psi
2,000 rpm 539 kPa 78.1 psi
4,000 rpm 736 kPa 106.72 psi
So if you plan on installing an oil pressure gauge, make sure it will handle > 100 psi
GU IV 2006; 3.0 DDi ST-S; Nissan Snorkel, Bull Bar and Tow Bar; Warn 8,000# Winch with Dyneema rope; Auber EGT, Boost and dual Battery gauges; Provent 200; Dual Batteries; Three Dogs recovery points; Rear Springs +20% load; Outback drawers and Cargo Barrier; UHF; [GPS, Radio, CD, Bluetooth, SD, USB] floor extension; Alloy roof rack
"Smart people know what they don't know"
Posting Permissions
Reply With Quote