Thanks CuppaOriginally Posted by Cuppa
I carry 2x3.7kg bottles. Using current shape bottles 2kg was the biggest I could fit, but older 3.7kg fitted. Found some & had the re-certified.
Cooker comes out on slides when in use, & it’s hose plugs into a bayonet fitting on the side of the gas cabinet. (Photo before bayonet fitting was installed). This circumvents the regs which apply if a permanent hose is used. To use a bayonet fitting you need a low pressure stove with a low pressure regulator on the bottle.
Spare bottle on drivers side. Well protected in ‘wrap around’ carrier. (It hinges open to get bottle out - custom made - bolts to chassis using existing threaded bolt holes). Can be padlocked shut.
The bottle on drivers side is the sort of set up I want so might do exactly the same but one each side or if local engineer/welder can manage to fit both on passenger side.
cheers
Reply With Quote