Running from catch can to sump?

[Hodge]

Hey guys, where are you all mounting the Provent, I am having a bugger of a time finding a spot to put it

This is how I mounted mine on the 3L. That little bracket holding it is just screwed onto one of the captive threads with a compatible bolt...
THat whole area was busy under my hood as the compressor and battery were there so limited for room. But made it work.
And the drain hose went down and under the wheel arch for easy draining.

[blocko05]

I agree with Hodge and Roofy. Why put black oil back in. Best to drain it and dispose of it correctly.

[Bloodyaussie]

I think it's the vapours that Jonathan is talking about.

Yes winnie... i was never talking about running the drain into the sump..

I will not be doing this as there are issues i now see.

[nissannewby]

Gee you guys spend some money on catch cans. Stick the hose in one of your empties and zip tie it somewhere haha

[Bloodyaussie]

Gee you guys spend some money on catch cans. Stick the hose in one of your empties and zip tie it somewhere haha

I was saying to mudski today that we used beer cans on our motorbikes... Japanese beer still have steel cans and were perfect.

I do know that my current set up is wrong and needs changing and will be sorted tomorrow while im doing my radiator.

[nissannewby]

I was saying to mudski today that we used beer cans on our motorbikes... Japanese beer still have steel cans and were perfect.

I do know that my current set up is wrong and needs changing and will be sorted tomorrow while im doing my radiator.

I dont even run one on my ute. Just a length of hose that I stuck into the chassis rail. I am yet to even see a drop of oil after 4 years. And 3 of those at over 20psi of boost.