hi guys
i need to replace the clutch in the troll its a y61 2013 i have been quoted 2500 to replace it with a single mass exeedy hd safari tuff clutch
just trying to find out where in Brisbane that people have had theirs done and how much
thanks Ron
hi guys
i need to replace the clutch in the troll its a y61 2013 i have been quoted 2500 to replace it with a single mass exeedy hd safari tuff clutch
just trying to find out where in Brisbane that people have had theirs done and how much
thanks Ron
20013 ST Diesel manual, ARB delux bar with smittybuilt winch, Chinese roof rack, ipf spotties, tjm awing
waeco cfx 50 and slide
Such a young car for a clutch. Any specific cause ? Towing ?
2005 TD42TI
yeh some dumb f#$k (me) tried to reverse a 2-3 ton trailer up a very slight hill with the inertia brakes on i had to borrow a mates 4.2 as i thought that it was just to heavy for the crd to get it back in my drive way i didn't realize that the brake was on till i got to the tip
20013 ST Diesel manual, ARB delux bar with smittybuilt winch, Chinese roof rack, ipf spotties, tjm awing
waeco cfx 50 and slide
Ouch. Sorry can't help with price or suggestion just curious how it happened ...
2005 TD42TI
Try bayside gearbox and clutch at merrit st capalaba ,
Oldmate1 (23rd July 2015)
Slacks creek brake and clutch also.
Oldmate1 (23rd July 2015)
Bloody expensive. I just had mine done from a dual clutch to a heavy duty exceedy single mass installed for $1600 in a GUIII
Just wondering, why is that dual mass is replaced with a single mass?!
If the problem is the clutch, why not replace the clutch to match the existing flywheel?!
Last edited by dom14; 28th July 2015 at 02:45 AM.
RB30, some 2-3 inch lift auxiliary LPG tanks
Few more mods on the way
http://www.worldwildlife.org/species/tiger
https://www.panthera.org/
Cheetah Outreach
Dual mass flywheels basically have like a rubber dampener in between two steel plates. This is done purely to help remove any vibrations. But they often fail. Replacing ot with a solid flywheel you no longer have to have concerns about a fly wheel failure. The downside is you will have a little more vibration. Nothing to worry about in my opinion.