Quote Originally Posted by the evil twin View Post
1.5T on the winch drum
1.5T on the winching vehicle anchor point and any rigging
1.5T on the cable from the winch to the snatch block
1.5T on the cable from the snatch block back to the vehicle anchor point (it is the same cable so must have the same load)
3.0T on the snatch block (2 cable loads at 1.5T each)
3.0T on the anchor point of the snatch block and rigging to whatever you anchored the snatchie too.
Thanks mate

Is there ever a case where you multiple or increase the load on equipment by hooking up redirects/double/triple line pulls? Or for the most part it halves, and stays the same as original on things like pulleys and anchor point the pulley is connected to?