OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 15

Thread: Lost power after mods

Threaded View

  1. #10
    Expert
    Join Date
    Mar 2012
    Location
    Unafordable
    Posts
    487
    Thanks
    19
    Thanked 359 Times in 224 Posts
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    I've replied already on another forum, so for benefit of members in here; HPD MAF housing lowers voltage about 0.25V give or take. Without increasing the fuelling via diesel chip the net effects are power loss at low to mid range, no limps though as it barely comes anywhere near the limp values hence 20 psi max boost and no limps.

    HPD actually notes in regards to this housing that it is not suitable for unchiped vehicle.

    I run one without the chip but I manipulate MAF voltages via JDVM unit and it is a pain to set up right with the HPD housing, very intermittent and inconsistent due to ambient temps and easily limps on aggressive settings in colder weather especially....

    I've regretted the purchase a long time ago...the airbox lid and cobra intake hose are good mods but the housing requires a chip and tuning on dyno to get the best out of it.

    Cheers

  2. The Following 3 Users Say Thank You to Rumcajs For This Useful Post:

    AB (18th June 2015), boosh (18th June 2015), mudski (18th June 2015)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •