ti automatic wiring diagram

[nicksamaniac]

The guy I bought it from wouldn't sell me it as he wanted to use it for the electric windows, so he cut the plugs off it!
I was pretty upset when I drove 350km to pick up the whole package and be given some plugs!
Thats what ya get for dealing with a teenager via fb I spose.....

[nicksamaniac]

Sorry, I just read your question again,
Just to put some light on it, I'm fitting this auto into my rb30det gq wagon.
Yes I'm aware that these never where fitted with autos.........
BUT.... im quiet the tinkering type!

I have a nissan stagea, it was auto, but is now a 5 speed manual.
And After alot (I mean alot) of reading, research, and picture googling, I decided to buy a box, measure it, and see if my stagea re4r03a bell housing would fit a patrol re4r03a box mid section, so I bought a cheap auto box, pulled things apart, put things together, took measurements.
And yes it does fit, happy days.

So the search started for all the bits I need, found a guy on fb patrol page wrecking a whole car, bought the whole auto setup (apart from the harness)
And now im here asking about diagrams haha...

received_1071903089502701.jpeg
Tb42 auto

received_1071903206169356.jpeg
C34 stagea auto, attessa 4wd same as a gtr.

received_1071926636167013.jpeg
And the patrol box with RB bell housing.
Going to use a rb flex plate, obviously to suit the engine and the tb42 converter on that to fit the input on the box, also just yo try the standard stall speed and see how it drives?
As you can tell its all r&d for me at this stage!

[jff45]

So was the trans oil pan removed and the plugs also removed from inside the trans?

I actually have a spare harness here but the plastic plug that goes into the trans has the locking fingers broken. It could be Sikaflexed in. That was how it was done by the trans shop who rebuild the box before I dismantled it to beef it up.
I didn't put it back into the box I just rebuilt because I know I have a better one in the trans I'm currently using.
I'll take a pic tomorrow.

[nicksamaniac]

Notice how the mid sections on both look similar, both Being labeled as jatco/nissan re4r03a autos.
Nissan, luckily for me, used this box in about a zillion different cars!
So I noticed the oil pump bolt patterns looked the same, thats what led me to start this project.
received_1071903346169342.jpeg
This the tb42 housing

received_1071903509502659.jpeg
And this is the rb25 stagea housing.

[NissanGQ4.2]

Click on the image to in large.

GQ Auto wiring diagram.jpg

[nicksamaniac]

I have the complete harness on the trans itself, plugs included.
I also have the plugs from the main body harness with about 6 inches of tail wire, so I have the tcu and plugs with some wire, and the connection to the box plugs with some wire, ive got wire colors at both ends but no idea what joins to what!

[nicksamaniac]

Thanks pal, I actually have that one!
But it doesn't match my colors and has a different number of wires.

[jff45]

This is what I have..

[NissanGQ4.2]

If you can't read the diagram its in the GQ manual on this forum which you can download now

If its the same manual as mine ( should be ) its page 63 in the AT section

[jff45]

Sorry, posted pic before I saw your reply