Put up with it until you can afford a GU front diff mate, worth every cent.
Put up with it until you can afford a GU front diff mate, worth every cent.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
The plot thickens... This has happened twice now and I have a theory as to why it is happening.
Last time I adjusted the wheel bearings I think I bent the drivers side circlip that holds it all together. I did not have a pair of circlip pliers so used two pairs of pointy nose pliers and I think I've stretched it.
It has come off and allows a bit of movement in the hub, now my wheel hubs have come loose a couple of times and I think this free play is allowing them to come loose.
I will order a GU hub nut upgrade and replace the circlips (with circlip pliers)
I drove the car this week and noticed a noise coming from that hub so I am assuming it has come loose again. This should help with my braking too.
Have you got your new brake lines in yet? ?
Darren found me a set of twin piston rotors in Traralgon for $100, sent the bloke a message saying I'd go pick them up that day and he had sold them a couple of hours earlier! I was spewing! Bloody hell Darren, faster next time!
BigRAWesty (24th May 2015), MudRunnerTD (24th May 2015), Stropp (24th May 2015)
You know I gave Irish a set and he will never get around to fitting them.....
Winnie (24th May 2015)
Winnie, awesome bus mate. Just wondering how the intercooler is nearly 2 years on? Have you had any dramas with it?
Rossco (17th July 2015)