factory swaybar disconnect gq patrol

[kwdmtm]

Hi all we have 2 Gq patrols in our family ,my sons one has a factory rear swaybar disconnect.
we have fitted an arb 3 inch lift and would like to retain the factory disconnect but due to the lift
itneeds to be lengthened, has anyone done this type of mod ?
Any ideas would be appreciated. ..

[BigRAWesty]

The only bloke who I know that does it is boarder track fabrication in boarder town.

I haven't taken mine off yet but need to so I can repair the rod end. And I'll extend mine while I'm at it.

[HV2002]

Welcome mate, this is a grate forum heaps of info and friendly people willing to help you out.

[doka404]

Bordertrek do an extension for the factory disconnect. Its a bit over 200.00 for the extension and for and extended HD link for the other side. They will need you to remove and send them the ball off the bottom of the disconnect and you will need to measure the exact lift.

I have one in mine

They also AFAIK can make an entire new slide pin which allows more movement in the factory disconnet.

[Dhuck]

Welcome to the forum mate

[kwdmtm]

Hi all we have 2 Gq patrols in our family ,my sons one has a factory rear swaybar disconnect.
we have fitted an arb 3 inch lift and would like to retain the factory disconnect but due to the lift
itneeds to be lengthened, has anyone done this type of mod ?
Any ideas would be appreciated. ..

Thanks for the quick response guys , muchly appreciated, will look into thanks !

[Sherro]

G'day mate welcome to the forum.

[MEGOMONSTER]

Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information.
Enjoy the sights and sounds of the greatest show on earth.

[89gqpatrol4x4]

I don"t mean to state the obvious but you know that the factory disconnect only does one side so in my opinion it would be best to buy after market disconnects.

[Winnie]

I don"t mean to state the obvious but you know that the factory disconnect only does one side so in my opinion it would be best to buy after market disconnects.

Only one side needs to be disconnected.