Quote Originally Posted by Dr Gary View Post
I have the same issue, AND I had the Dawes and needle valve working what seemed ok. Issue came after the plate was installed.
It seems the boost must be arriving too early and too hard. Do I adjust the needle valve SLOWLY and see what happens.
My high boost Dawes is about 20psi--too high methinks. Comments please
Your running a twin Dawes setup. I would go higher. Mines been running at 25psi for well over 12month now.... But thats how I have it. Some would say its too high. Some not. But it goes alright, for a ZD, and have had zero issues with it so far, touch wood...
whats your low boost set at?