AB (27th February 2015)
Maxhead (27th February 2015)
AB (27th February 2015), Clunk (27th February 2015), mudnut (27th February 2015), Punderhead (27th February 2015), Winnie (27th February 2015)
F.....ing traffic.
Two and a half hours home from Monash Uni in Clayton.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
MEGOMONSTER (27th February 2015)
________________________
______ 2017 D-Max _______
I don't have a short temper. I just have a quick reaction to bullshit
WARNING: Towballs used for recoveries can, and do kill people and damage property.
AB (27th February 2015), MEGOMONSTER (27th February 2015)
Maxhead (27th February 2015)
Last edited by dave97; 27th February 2015 at 06:39 PM.
Had the windscreen guy come out, from about 6 feet away " Na, can't fix that".....I said, "Hang on, the guy on the phone said if it was smaller than a 5 cent piece then it could be fixed"
Without even approaching it, "Nah, you see it's got all those little cracks in it, have to put a new one in"...
So after a few choice words I booked it in for a new one on Monday morning; yes, it could be done over the weekend for an extra $100....
Meanwhile, I went to SCA got the Permatex kit and had a go myself, it's not perfect but will see how long it takes till it pisses me off..
After checking a few things on the web, I think he refused to repair it because it fell within their 300mm driver view area...
Either way, I cancelled Mondays appointment and will postpone replacing it for as long as I can...
So, for forum information.....the mob wasn't Oh Oh Oh O*****, it was another National company..
It will cost $195 dollars to have a windscreen fitted to a Y61 patrol, they can't uses the original seal, so it will be replaced with an after market seal which is slightly wider than the original, the replacement windscreen will have the tinted top.
DIY was about $28. and about an Hours work ( which included the waiting periods as per instructions)
Wife's car needs another key, best price was $425 supplied, cut and programmed, ring a mate at holden and the rest is in the happy thread.![]()
Last edited by jay see; 28th February 2015 at 03:34 PM.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
Dales300exc (2nd March 2015)