AB's new GQ is finally here

[AB]

I'm re jigging my ic piping today and desperately need one of these today

Does anyone know where in Melbourne I could get one of these flanges???

[Alitis007]

No pic andy

[Winnie]

This one George!

[AB]

All good I managed to get this working a treat for now.

[Winnie]

Uh-oh, sounds dodgey!! lol

[AB]

Uh-oh, sounds dodgey!! lol

No, the first install was dodgy as it was rubbing a bit.

This is fixing the dodgy...lol

[Winnie]

No, the first install was dodgy as it was rubbing a bit.

This is fixing the dodgy...lol

If it makes you feel better, I didn't notice. haha

[AB]

Success!!!

After swearing a few times the ic pipe does not rub against anything!!

It was like playing that board game Operation!!!

[nissannewby]

I'm re jigging my ic piping today and desperately need one of these today

Does anyone know where in Melbourne I could get one of these flanges???

You can use the existing flange you have. Grab an exhaust adaptor for whatever size you need eg 2.5"-3", cut the pipe off the original, clean the hole up so the adaptor fit then weld it in place.

[AB]

You can use the existing flange you have. Grab an exhaust adaptor for whatever size you need eg 2.5"-3", cut the pipe off the original, clean the hole up so the adaptor fit then weld it in place.

Could definitely do that, cheers big ears!!!