GQ ARB Bullbar fitting.

[liftlid]

I had one done last year $270 inc blast and powder coat black.

[Jimmyboyjr4]

I got a quote today from one in my area, $150 for the powder coat and $100 for the sand blasting. They seemed quite professional and have very decent equipment, think I'll go for it!

[mudski]

Although after looking at prices I may not usr POR15 yet, anything cheaper I could use? or should I just bite the bullet and speak to a powder coater? As from what I've read its not too expensive and will last a lot longer than any I can repaint it with.

Once you use POR15 you will want to do everything on your car in it. Best stuff ever.

[Jimmyboyjr4]

I plan to do a general clean up of the unders with POR15 especially the diffs, they are feeling a little rough at the moment.

[threedogs]

Once you use POR15 you will want to do everything on your car in it. Best stuff ever.

http://www.ebay.com.au/itm/Por-15-Ru...item3cd071b5e0

Phenominal stuff POR15 and would be perfect for diffs wont be wearing POR15 off in a hurry.
Have a look at some chassis's on the better hot rods awesome finish

Instead of sand blasting there is a process where they burn it off a bit cheaper to.
after its blasted you might want to think about extra antenna lugs or Lightbar brackets