Hydro brakes ?

[ala]

Any one on here fitted "Hydro Brakes" ? I've been looking into these and in touch with a guy in the States who's going to make mine . However he's told me he's just sent some out before Crimbo to some of you guys in Aus. I figured you must know who it is fitting them down your way
I'd love to hear some first hand knowledge etc
Cheers big ears

Hi I fitted these brakes to my GQ last year best thing ever done. IM running 35inch tyres truck weighs about two tonne will lock all wheels with little effort. Just be aware you may have to change master cylinder the original may leak. They say you can use the original steering pump but I found when brakes where in use the steering became erratic very heavy then ok very unsettling if you are going around a corner. I had a new master cylinder matched to hydroboost form USA much easier and cheaper also had new pump sent from USA. I had to make up mounting brackets but not much effort. Also made up my own hydraulic lines using aero fitting they just screw together all less $100 to expensive to have them sent from USA. Not necessary to use braided lines. do a search on googgle you find they perform no better than normal rubber brake lines. yes they do look better but very expensive. If you want fotos or any help just ask.

AL