OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: New Adelaide owner queries steering/handling, cooling, heaters etc and service agents

  1. #11
    Expert
    Join Date
    Jan 2014
    Location
    Adelaide
    Posts
    164
    Thanks
    4
    Thanked 32 Times in 24 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi guys,
    Uni exams are over for another semester so time to look at the 4x4. I will start with a basic service, then fault find and replace as required (hopefully addressing the horrible rough idle!!).
    Can anyone confirm what filter options are available? I have read a number of times not to use the z9, however i read the Z115 is a cheaper larger version of the Z170 (Z170 used in restricted access areas). Online Ryco stated Z115 however in a store their guide mentioned Z170. Is everyone sticking with the expensive Z170 or is the Z115 fine?

    For oil SCA has Shell Helix HX3 20W/50 on special for $24 for 10L whereas Penrite HPR 30 is about $38 5L ($76 for 10L) from SCA! The previous services used whatever cheap semi-synthetic oil was available (so im told). The HX3 is Shells standard recommended oil for the TB42, however i have not used it before; i imagine it will be fine?

  2. #12
    Patrol God BigRAWesty's Avatar
    Join Date
    Sep 2012
    Location
    Mount Gambier, SA
    Posts
    13,581
    Thanks
    16,045
    Thanked 4,808 Times in 3,178 Posts
    Mentioned
    44 Post(s)
    Tagged
    0 Thread(s)
    I run the z9 or z115's never had an issue. Changed out every 10thou though..
    And run a 15w 50 oil.
    Don't forget the fuel filter.
    And I run the penrite hpr diesel 15, changed out every 5 thousand..
    Last edited by BigRAWesty; 20th December 2014 at 09:06 AM.
    Cheers
    Kallen Westbrook

  3. #13
    Dribble Master Clunk's Avatar
    Join Date
    Dec 2010
    Location
    Perth, WA
    Posts
    22,555
    Thanks
    14,474
    Thanked 12,763 Times in 7,162 Posts
    Mentioned
    119 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by Jonesy_sa View Post
    Hi guys,
    Uni exams are over for another semester so time to look at the 4x4. I will start with a basic service, then fault find and replace as required (hopefully addressing the horrible rough idle!!).
    Can anyone confirm what filter options are available? I have read a number of times not to use the z9, however i read the Z115 is a cheaper larger version of the Z170 (Z170 used in restricted access areas). Online Ryco stated Z115 however in a store their guide mentioned Z170. Is everyone sticking with the expensive Z170 or is the Z115 fine?

    For oil SCA has Shell Helix HX3 20W/50 on special for $24 for 10L whereas Penrite HPR 30 is about $38 5L ($76 for 10L) from SCA! The previous services used whatever cheap semi-synthetic oil was available (so im told). The HX3 is Shells standard recommended oil for the TB42, however i have not used it before; i imagine it will be fine?

    Mate, the Z170 to be used on TB42's..............the Z115 is for the TD42s

    Ive just used 15W-40 Castrol GTX Magnatec, never had a problem with it


  4. #14
    Dribble Master Clunk's Avatar
    Join Date
    Dec 2010
    Location
    Perth, WA
    Posts
    22,555
    Thanks
    14,474
    Thanked 12,763 Times in 7,162 Posts
    Mentioned
    119 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by biggqwesty View Post
    I run the z9 or z115's never had an issue. Changed out every 10thou though..
    And run a 15w 50 oil.
    Don't forget the fuel filter.
    And I run the penrite hpr diesel 15, changed out every 5 thousand..

    but you don't have a TB42 Kallen


  5. #15
    Expert
    Join Date
    Jan 2014
    Location
    Adelaide
    Posts
    164
    Thanks
    4
    Thanked 32 Times in 24 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    If you use the Ryco filter selector you will find for the Ford Maverick, Ryco recommend the Z115, whereas entering the Patrol GQ reveals the Z170. Both for the TB42. Image below is the Maverick output. This explains my confusion as I quite regularly swap between the Maverick and Patrol in those books as I assumed it would be the same?
    Fair bit of qualitative data here:
    http://www.patrol4x4.com/forum/nissa...70/index2.html

    image-1396821865.jpg

  6. #16
    Patrol God BigRAWesty's Avatar
    Join Date
    Sep 2012
    Location
    Mount Gambier, SA
    Posts
    13,581
    Thanks
    16,045
    Thanked 4,808 Times in 3,178 Posts
    Mentioned
    44 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Clunk View Post

    but you don't have a TB42 Kallen
    Quote Originally Posted by Drewboyaus View Post

    Mate you have a TD42 not TB. Different specifications. Different engines.

    Sent from my iPhone using Forum Runner


    Sorry, missed that bit.
    I wonder what the differences are as the ford recommend the z9 for the petrol 6
    Last edited by BigRAWesty; 20th December 2014 at 11:47 AM.
    Cheers
    Kallen Westbrook

  7. #17
    CERTIFIABLY INSANE Drewboyaus's Avatar
    Join Date
    Oct 2011
    Location
    Essendon
    Posts
    3,332
    Thanks
    1,509
    Thanked 1,525 Times in 887 Posts
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by biggqwesty View Post
    I run the z9 or z115's never had an issue. Changed out every 10thou though.. And run a 15w 50 oil. Don't forget the fuel filter. And I run the penrite hpr diesel 15, changed out every 5 thousand..
    Mate you have a TD42 not TB. Different specifications. Different engines.

    Sent from my iPhone using Forum Runner

    1997 GQ Patrol RX, TB42E. Mods: OME 2" lift, 33" BFG KM2'S, ARB winch bar & reconditioned X9 Superwinch, IPF 900 spotties HID conversion, ARB side steps and scrub bars, Kaymar rear step & spare wheel carrier & jerry holder, Rear 55W LED worklight, Safari Snorkel, 147L LRA tank, Extended diff breathers, dual batteries, GME UHF, Home built drawer and fridge slide, ARB 60L fridge.

  8. #18
    Dribble Master Clunk's Avatar
    Join Date
    Dec 2010
    Location
    Perth, WA
    Posts
    22,555
    Thanks
    14,474
    Thanked 12,763 Times in 7,162 Posts
    Mentioned
    119 Post(s)
    Tagged
    1 Thread(s)
    yeah the Z9, Z115 and Z170 all have the same thread, same seal and seam diameters................... but I'm guessing the internals/filtering properties would be different.


  9. The Following User Says Thank You to Clunk For This Useful Post:

    BigRAWesty (20th December 2014)

  10. #19
    Patrol God BigRAWesty's Avatar
    Join Date
    Sep 2012
    Location
    Mount Gambier, SA
    Posts
    13,581
    Thanks
    16,045
    Thanked 4,808 Times in 3,178 Posts
    Mentioned
    44 Post(s)
    Tagged
    0 Thread(s)
    Seems the z9 doesn't have a relief valve but the 115 has one inbuilt. Thus the few extra bucks.
    Not having much luck finding comparisons between the 115 and 117
    Cheers
    Kallen Westbrook

  11. #20
    Advanced
    Join Date
    Feb 2012
    Location
    Aldinga Beach, sa
    Posts
    54
    Thanks
    8
    Thanked 4 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi jonesy_sa have you try pedders they do saftey checks of everything and they are cheap. I got a car checked though them and it only cost $20. it seems like there ifs something wrong there with the steering. Was there anything said about a front end crash with it before you brought it. Check the gap between the front doors and the guard and see if they are even. If you have anyother question I will ask my brother as he is a panel beater

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •