What did you do to your Patrol today!

[megatexture]

Gridded the sht out of my shock towers and painted em tomorrow to cut the wheel arches for access to the shock top bolt

[Semmo]

Made a couple of recovery points for the front 20mm plate

[Patrol'n]

Measured up so I know what size bits to buy for my barn door folding table I need to build

[BigRAWesty]

Serviced it.
510,000. Still going.
So I thought I'd throw it on ramps to aid under it like I do the falcon.
Was wicked. Could have a game of cricket under there.
What I'd didnt think about though was the rest of it.


ForumRunner_20141214_114640.png

Looks like I'm changing filters and filling off a ladder.
That's a 5ft ladder lol

FYI. The car is level. My driveway is downhill

[BigRAWesty]

And for the last week I've been smashing out my newest addition.

ForumRunner_20141214_145925.png


ForumRunner_20141214_145936.png


ForumRunner_20141214_145945.png

To house the new 11xp


ForumRunner_20141214_150206.png


ForumRunner_20141214_150232.png

Hope you enjoy

[93patrol]

Looks awesome Kallen. Nice work

[megatexture]

Just finished extending the front shock mounts, I only managed to get an extra 40mm and it was a tight fit even with some wheel arch pannel work and a 60mm hole cut up the top to access the top of the shock

[growler2058]

Tidied up the UHF wiring
Washed it
Bit of touch up paint on some stone chips

[Ben-e-boy]

Just finished extending the front shock mounts, I only managed to get an extra 40mm and it was a tight fit even with some wheel arch pannel work and a 60mm hole cut up the top to access the top of the shock

Pics or lies...you know the drill

[MudRunnerTD]

Gridded the sht out of my shock towers and painted em tomorrow to cut the wheel arches for access to the shock top bolt

Yeah I used a 50mm hole saw and cut the top out of the inner guards to allow access to the top of the shock the other week, need to take out some of the body lift and this will make part of it a little easier.