Geeze mate fagatha is going to have more technology thannthe moon mission.
All this to keep an engine turning lol.
I luuvvvvv my td42.
Geeze mate fagatha is going to have more technology thannthe moon mission.
All this to keep an engine turning lol.
I luuvvvvv my td42.
Cheers
Kallen Westbrook
How does the blue nylon tubing fit onto the steel barb fittings on the diffs etc etc?Originally Posted by growler2058
A kit was $65. The breathers on the tnsfr and g/box are a prick to get to so I was able to put the new hose into the existing up in the engine bay then extend. The front diff, gbox and tnsfr are already quite high at the top of the wheel arch. Definitely an improvement on the lowly GQ
and where pray tell did you get that from
is it any good and only for a crd
Replacements are used mate
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Not sure mate anything with a computer
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
Sir Roofy (12th November 2014)
Der, sorry. Replacement what? The barbs on the breather outlets originally use rubber hose on them. Those breather tubes are nylon. Do they have some at the ends to adapt it?
Yeah Roofy it won't fit your bud. You need a device called ECU Talk. Same thing but different, in a nutshell.
Der replacement "barbs" but not barbs same connection as the pic on the firewall
IF YA DONT GET STUCK YA AINT TRYIN HARD ENOUGH........OR YA TOOK THE CHICKEN TRACK
WARNING: TOWBALLS USED WITH SNATCHSTRAPS DO KILL!!
mudski (12th November 2014)
Hairy muff! Thanks. Bit warm here tonight, a few too many beers makes me fuzzy.
growler2058 (13th November 2014)
Just replaced my console lid latch, so it doesn't bounce anymore, and installed my cup holder in the front console, hooray, now my drinks will stay put! Can't overstate how much better that is!
Reply With Quote
