Quote Originally Posted by happygu View Post
The extra lights are very handy from a safety perspective, and look good too.....

Reverse Light is only in the body, but you only have drivers side light from the factory.


When the time comes, you can purchase the aftermarket ones with LED Lights or normal globes, and with a little bit of wiring, you have Stop/Tail, Reverse and Indicators in the body on both sides.

From what I can remember, Drivers side was plug and play, but you need to add stop and tail from below, and the passenger side requires a wire from the other side for reverse, and the rest from below.

I had a couple of nice wire grommets perfect for the job, and there is a flat spot underneath on the inside panel which looks like it was made for a wiring loom but there is no hole ( lie down and look from the chassis rail towards the inside body panel and it will be obvious. I just drilled the hole, painted the edges and inserted grommet with wiring, then straight across to the bumper lights ( and dont freak out too much about the miniscule factory wiring you will find. I just bared back the insulation where I could, wrapped the new wire around, soldered and taped. All good.

Mic
Cheers mate. I don't like doing auto elec but that sounds easy enough