Thanks CGM. Appreciated! I enjoy reading other build threads and the ideas it gives me so I hope I give others ideas aswell.
Thanks CGM. Appreciated! I enjoy reading other build threads and the ideas it gives me so I hope I give others ideas aswell.
IMO and should be taken with a grain of salt.
Picked up a clutch and freshly machined flywheel that had been installed for 1 week. Apparently the bloke ran the engine without oil and killed it. Score for me.
Also grabbed a gearbox with half the mileage that mine has.
Picked up the lot for $350. Stoked!
IMO and should be taken with a grain of salt.
Clunk (21st October 2014), growler2058 (21st October 2014), NissanGQ4.2 (19th October 2014)
Considering I have elongated bolt holes my answer is NO 2 overkill and when are you coming down 2 Sydney 2 brace mine? *L*Originally Posted by Parksy
Wondering if anyone has ever braced the radius arm mounts like this? Overkill?
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Parksy (19th October 2014)
Tell my wife that I have to and ill be right over.
By the way, good luck!!
IMO and should be taken with a grain of salt.
NissanGQ4.2 (19th October 2014)
Gearbox/transfer apart. Bloody heavy mofo.
IMO and should be taken with a grain of salt.
Clunk (21st October 2014), growler2058 (21st October 2014), NissanGQ4.2 (21st October 2014)
Parksy,
How old is the box and transfer, as the seals and joint look immaculate....
Mic
GU PATROL 2011 Ti, with goodies...
Parksy (21st October 2014)
I was told 230000km. Feels good when shifting through the gears and the input shaft has zero play. Going to be a vast improvement compared to my box, which I thought was ok until I felt this box... Oh that sounds dirty...
IMO and should be taken with a grain of salt.
Way overkill. But go nuts lol.
Mine just had 3mm washes welded on.
Much easier to remove if they flog out again..
Cheers
Kallen Westbrook
Parksy (21st October 2014)
My boy doing a great job of cleaning the transfer box. If there's power tools operating then he's gotta be there. Love it!!
IMO and should be taken with a grain of salt.
cgm (23rd October 2014), Clunk (23rd October 2014), mudnut (25th October 2014), NissanGQ4.2 (23rd October 2014), Rossco (23rd October 2014)
haha cute!!!!
Parksy (24th October 2014)
Posting Permissions
Reply With Quote
