One of the two can be arrange, at a cost.Originally Posted by mudski
One of the two can be arrange, at a cost.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
And yes it does. Made to fit with OEM mounting. I even have the OEM rubber that's under the bonnet on there...
Patrol-Guy (2nd September 2014)
Website says $588.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Hodge (2nd September 2014)
Now I found this in the fine print.
$538 for louvre and scoop.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Hodge (2nd September 2014), Patrol-Guy (2nd September 2014)
Do you know if that's painted? If not I wonder how much it costs to get them painted at the local panel beater?
Cheers Rod
_______________________________________________
Bitumen ...... Another watse of public funds
My Build 2005 TD42TI
I paid just over $600 unpainted But that was delivered, came wrapped in bubble wrap and inside a wooden box.
I went to the local auto paint shop and they mixed up some paint in the factory colour and put it in a spray can, and I painted it my self, not difficult and came out very good.
2010 TB4.8, 5 speed auto TI Wagon, Beaudesert ceramic coated Extractors and 2 1/2 inch exhaust, 3inch lift, BP-51 shocks, Black hawk radius arms and drop boxes, Road Runner Offroad billet alloy draglink, Boss air bags, 295/70/17 KM3s, Redarc Gauges, GME XRS UHF, Autometre fuel gauge, Alpine head unit with offroad maps, Carbon winch, Opposite lock bull bar, Light Force Strikers, Safari Snorkel, Duel long range tanks, work in progress.
Patrol-Guy (2nd September 2014)
Mine came painted white from Guests. As my car is white...
Last edited by mudski; 2nd September 2014 at 09:58 PM.
They come white but I would clear coat that for a better finish, to fit all you need in a minimax socket set and un-do 4 or 6 x 10mm nuts,
there is a steel retaining plate plus the rubber cushion.
After cleaning the bonnet of dirt etc with an alcohol wipe pull off the backing tape and place scoop in position,
then place rubber cushion and steel retaining plate in position and re tighten the 4 or 6 nuts DO NOT OVER TIGHTEN
Last edited by threedogs; 3rd September 2014 at 12:09 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Patrol-Guy (3rd September 2014)
Could you just use a 3M vinyl wrap for the scoop?
I think that's what I'd do plus the whole bonnet also.
As I get lots of glare from my roof rack lights but I guess my eyes just adjust anyway.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
Just ordered the scoop, $588 + $42 postage + $10 packaging & admin. Will be here late next week.
MEGOMONSTER (5th September 2014)
Posting Permissions
Reply With Quote