EFI to Diesel conversion.

[MudRunnerTD]

Here you go chop, sorry I didn't get them earlier

ImageUploadedByMotorculture1407889801.078804.jpgImageUploadedByMotorculture1407889810.959968.jpgImageUploadedByMotorculture1407889821.111795.jpgImageUploadedByMotorculture1407889832.095563.jpg

There is no power steering cooler

The line runs across the chassis and back to itself.

ImageUploadedByMotorculture1407889887.511077.jpgImageUploadedByMotorculture1407889897.461943.jpgImageUploadedByMotorculture1407889908.295251.jpg

The last pic shows the full system in its loop
ImageUploadedByMotorculture1407889924.377717.jpg


Sent from my iPhone using Motorculture mobile app

[MudRunnerTD]

I don't have my radiator or fan in at the moment so a very clear view


Sent from my iPhone using Motorculture mobile app

[Bloodyaussie]

Thank you Darren... about bloody time.

The battery tray pics do not help as I need to know where it is bolted down under the tray?

I will post a pic of my ARB tray and the holes but I think I maybe missing some hardware, ARB were not able to help.

[Winnie]

I am sure I have fitting instructions from ARB on my computer at home Johnny... please remind me this arvo!!!

[Chappy]

Hey guys, quick question.

Do I need to swap over the power steering pumps? My Series 2 EFI one has much longer lines than the one in the diesel, although the pump seems to be the same.

Obviously I'd need to swap the lines as they wouldn't bolt to the same spot on the motor, but does the actual pump need swapping?

[Bloodyaussie]

Pump is on the other side of the engine and is different... hard to find bit of kit.

[Chappy]

Thanks BA. By the pump I meant the box that bolts onto the chassis. Do I need to swap that? Can I bolt my series 2 pump onto the diesel motor?

[Bloodyaussie]

Thanks BA. By the pump I meant the box that bolts onto the chassis. Do I need to swap that? Can I bolt my series 2 pump onto the diesel motor?

That is a steering box... I am not sure what you are asking... if you have a pump on your td42 already yes that will work with the steering box but you need to use the td42 lines.

[MudRunnerTD]

Thanks BA. By the pump I meant the box that bolts onto the chassis. Do I need to swap that? Can I bolt my series 2 pump onto the diesel motor?

The steering box is the same. if anything you might have the larger series II box for the win. THe lines will make little difference given the pics above, There should be no need to even run the copper pipes as they appear to do little? maybe only dissipate heat?

[Bloodyaussie]

Well im confused.... I going to get a beer.