Hi,
I've just been measuring the patrol height before I install my new 2 inch King springs and shocks into my GU 2.8L TD.
I measured from the bottom of the 16 inch rim to the bottom of the guard.
These were the results:
Front left 775mm
Front right 750mm
Back left 760mm
Back Right 750mm
I am just wondering if that's normal to have the left side higher then the right? Anyone who hasn't lifted their patrol is that around the std heights?
sagging due to the Drivers constant weight and also the Sub tank on that side. Dont be concerned mate, thats why your swapping it out.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.Originally Posted by Rogue Dung Beetle
WARNING: Towballs used for recoveries can, and do kill people and damage property.
growler2058 (15th June 2014), Kano (15th June 2014)
Hey thanks for your reply. I didn't think about the sub tank. The new springs should straighten it up
Kano,
It will always have a little variance, as the GU is no precision thing.
A few mm difference will not affect the way it drives
GU PATROL 2011 Ti, with goodies...
Kano (15th June 2014)
Posting Permissions
Reply With Quote
